Fuel Oil Centrifuge Disc Stack Centrifuges , 2000LPH 3 Phase Separator
Description
Model PDSD2000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and landused diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.
The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.
The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
Main Technical Specification
| Discharging type | Variable discharging |
| Max capacity | L/h | 6000 |
| Output pressure of clear oil | Mpa | ≤0.2Mpa |
| Motor power | kW | 7.5 (380V/50Hz/3P) |
| N.W. | kg | 620 |
| Dimension | L × W × H (mm) | 1049 × 729 × 1090 |
The whole unit consists of
1. Separator 2. Oil feed pump 3. Electric control box 4. Steam heater 5. Temperature adjusting valve 6. Steam trap 7. Safety valve 8. Pressure switch 9. Oil filter 10. Pressure gauge 11. Vacuum gauge 12. Temperature sensor 13. 2/2 Solenoid valve 14. 2/3 Solenoid valve 15. Air reduction pressure valve 16. Pneumatic three-way valve 17. Stop-check valve 18. Brass filter ball valve 19. Water pressure reducing valve 20. Ball valve 21. Skid
Automatic Control System
Condition for mineral oil separation and actual capacity (refer to the chart)
| Oil types | Fuel oil | Lubrication oil |
| Fuel oil | Heavy fuel oil | SAE30, 40 | Detergence oil | Steam turbine oil |
| Kinematical viscosity (mm²/s) | 1.9-5.5 | 5.5-24 | 120 | 180 | 380 | 100-120 | 61.2-74.8 |
| 40℃ | 50℃ | 40℃ | 40℃ |
| Density
(kg/m³)(20℃) | < 900 | 900-991 | 880-900 | < 900 |
| Separating temperature (℃) | Normal temperature, 40-60 best | 90-98 | 80-95 |
| Recommended capacity (L/h) | 6500 | 6000 | 4500 | 4000 | 3000 | 2000-3500 | 2000-3500 | 4000-5000 |
| If you have special requirement, please connect with us. |
Overview
